Sound profile
BOX Brown V2 is not a vague, barely-there brown. Kailh rates a 75±10 gf tactile force, giving the keypress a much clearer event than Red V2 while keeping sound at a medium level instead of White V2’s loud click.
Cart (0)
Tactile
Kailh BOX Brown V2 5-Pin Tactile Switch
At a glance
Key specifications
The most important verified numbers for this product, shown before the deeper sections.
45±10 gfOperating force
3.6±0.3 mmTotal travel
TactileSwitch type
5-pinMount
YesFactory lubed
POMStem material
MediumSound profile
Character
Sound & feel
How this product sounds and feels to type on, described in plain terms.
Typing feel
That makes it valuable for users who want more control and confirmation but still need a more socially manageable sound profile than a clicky board.
Fit & build
Compatibility & build notes
What to check before ordering, and how the build is put together.
Tactile
5-pin PCB Mount
Factory Lubed
POM Stem
Compatibility
BOX V2 uses a 5-pin MX-style mount and supports SMD LEDs. It can be used in hot-swap keyboards when the PCB/socket supports standard MX-style mechanical switches and accepts the two extra plastic positioning pins. A 70-switch pack covers many 65% layouts, 90 switches gives room for many 75%/TKL builds, and 110 switches is the safer choice for full-size or spare-switch coverage. Always count your board before ordering. 5-pin mount — confirm PCB and plate support for your board.
Build notes
5-pin mount: verify PCB support. SMD LED support is listed by Kailh. 10/70/90/110 packs keep selection simple.
Fit & trade-offs
Decide quickly whether this product fits your build
A strong fit if you want
✓
Stronger tactile feedback
✓
Mixed office and typing builds
✓
Users who want control without clicky noise
Consider alternatives if you prefer
→
A different switch type
If you need tactile feedback or a silent build, compare other families.
→
A specific force target
Pick a switch whose operating force matches your preference.
→
Another build use case
Match the product to how and where you actually type.
Sizing help
How many switches do you need?
Switch count depends on your keyboard's layout. The typical ranges below are a starting point — the exact number depends on the specific model and any extra keys.
60%
61 – 68 keys
Recommended 65%
66 – 75 keys
75%
81 – 88 keys
TKL
87 – 92 keys
Full-size
104 – 110 keys
This product is available in packs of 10 / 70 / 90 / 110 switches — pick a pack that covers your layout with a small margin for testing or replacements.
Exact switch count depends on keyboard model / layout (and any novelties or extra keys). Always confirm against your board's official key count before ordering.
Product deep dive
Understand the product before you choose it
Focused sections explain the details buyers care about, supported by the product's specification data.
TYPING FEEL & SOUND
Stronger tactile control without the click
BOX Brown V2 is not a vague, barely-there brown. Kailh rates a 75±10 gf tactile force, giving the keypress a much clearer event than Red V2 while keeping sound at a medium level instead of White V2’s loud click.
That makes it valuable for users who want more control and confirmation but still need a more socially manageable sound profile than a clicky board.
- Stronger tactile event than a typical light brown.
- Factory pre-lubed for a smoother stock feel.
- The stronger bump can feel tiring to very light typists.
Choose Brown V2 when ordinary browns feel too soft and White V2 is too loud.
CONSTRUCTION & SPECS
BOX V2 structure focuses on stability and durability
BOX V2 uses its housing platform with a longer spring and five-pin positioning structure. The practical buyer benefit is a durable, stable switch base; Brown’s own reason to choose remains its tactile, non-clicky response.
The BOX wall and dust-resistant structure are practical reasons to pay for the platform: the value is not just stem color, but a more stable mechanical package with broad MX-style compatibility.
- 5-pin mounting adds PCB stability.
- POM stem with PC/Nylon housing construction.
- Longer gold-plated spring supports rebound and corrosion resistance.
You are buying a complete BOX V2 platform, not just a colored stem.
BUILD FIT & QUANTITY
Five-pin fit plus pack sizes for real keyboard builds
BOX V2 uses a 5-pin MX-style mount and supports SMD LEDs. It can be used in hot-swap keyboards when the PCB/socket supports standard MX-style mechanical switches and accepts the two extra plastic positioning pins.
A 70-switch pack covers many 65% layouts, 90 switches gives room for many 75%/TKL builds, and 110 switches is the safer choice for full-size or spare-switch coverage. Always count your board before ordering.
- 5-pin mount: verify PCB support.
- SMD LED support is listed by Kailh.
- 10/70/90/110 packs keep selection simple.
Choose pack size by keyboard layout, but verify the exact switch count and PCB mount first.
COMPARE ALTERNATIVES
White, Brown or Red: choose the feedback you actually want
Brown is the control-focused middle option: more feedback than Red, less noise than White, and a stronger tactile event than many conventional brown switches.
The three models share the same BOX V2 family foundation, so the purchase decision should be driven primarily by feedback, sound and operating feel rather than by assuming one color is universally better.
- White V2: clicky, loud, typing-first.
- Brown V2: stronger tactile control, medium sound.
- Red V2: smooth linear travel, low sound.
Choose Brown V2 when you want a clearly felt bump for typing control but do not want the louder click of White V2.
Decision support
Open full comparison →
Compare Kailh BOX Brown V2 5-Pin Tactile Switch with realistic alternatives
The goal is to make the key trade-offs visible: weight, travel, stock preparation, sound direction, and the type of user each product serves best.
Specifications
HMX Waverider V2 Tactile Switch
Type
Tactile
Tactile
Tactile
Tactile
Operating Force
45±10
45 gf
45 gf
42
Bottom-out Force
—
50 gf
50 gf
53
Total Travel
3.6±0.3
3.7 ± 0.3 mm
3.5 mm
3.8
Sound Profile
Medium
Light tactile; clean/clacky-leaning tendency
Low-pitched / thocky-leaning
Crisp / Clacky / Poppy
Factory Lubed
Yes
Yes
Yes
Yes
Mount
5-pin
5-pin
5-pin
5-pin
Stem Material
POM
POM
Other verified: H2 large spherical-tip
POM
Best For
—
—
—
—
Structured product data
Detailed specifications
General
- Brand
- Kailh
- Switch type
- Tactile
- Mount
- 5-pin
- Factory lubed
- Yes
Performance
- Operating force
- 45±10
- Pre-travel
- 2.0±0.4
- Total travel
- 3.6±0.3
- Sound profile
- Medium
- Typing feel
- A stronger tactile BOX V2 for users who want real feedback without full clicky noise.
Construction
- Stem material
- POM
- Top housing
- PC
- Bottom housing
- Nylon
Compatibility
- PCB mount
- 5-pin
In the box
What's in the box
Exactly what ships with this product. The switch count and color update with the options you select.
Selected pack
70
switchs
- Included switches70 switchs
- Selected color—
Product-specific FAQ
Frequently Asked Questions
Straight answers to the questions that most often decide a purchase.
Yes. Kailh lists this BOX V2 model as Tactile. It uses a 5-pin MX-style structure and shares the BOX V2 housing platform with the White, Brown and Red versions, while the operating feel and sound are specific to this model.
Kailh rates this model at 45±10 gf operating force, 2.0±0.4 mm pre-travel and 3.6±0.3 mm total travel. Those figures come from the official BOX V2 technical data and are the best reference for comparing the three BOX V2 options.
Yes. Kailh lists this model as factory pre-lubed, which is intended to reduce unnecessary friction and improve stock smoothness.
It can work in hot-swap keyboards that support standard MX-style mechanical switches and accept a 5-pin mount. Some PCBs support only 3-pin switches, so check the socket and the two plastic positioning-pin holes before ordering.
Use 10 switches for testing or small projects. Around 70 switches covers many 65% boards, 90 switches is useful for many 75% or TKL builds, and 110 switches gives more coverage for full-size layouts or spares. Count your exact keyboard first.
Brown is the control-focused middle option: more feedback than Red, less noise than White, and a stronger tactile event than many conventional brown switches. Because the housing platform is shared, choose mainly by feedback and sound rather than assuming the colors are cosmetic variations.
Skip Brown V2 if you have a very light touch, dislike stronger tactile resistance, or want the fastest-feeling bump-free linear press. The best switch is the one that matches your tolerance for sound, resistance and feedback, not simply the model with the strongest specification.
Ready to build with Kailh BOX Brown V2 5-Pin Tactile Switch?
Choose the option for your build, add it to your cart, or compare before ordering.