Sound profile
Factory lubrication and the closed-bottom construction may support a clean, controlled sound, but KeebPilot has not lab-measured this switch’s acoustics. Final sound varies with case, plate, keycaps, damping and mounting.
Cart (0)
Linear
OWLAB Ti HE Magnetic Switches
At a glance
Key specifications
The most important verified numbers for this product, shown before the deeper sections.
40 gfOperating force
3.4 ± 0.2 mmTotal travel
LinearSwitch type
5-pinMount
YesFactory lubed
POMStem material
Character
Sound & feel
How this product sounds and feels to type on, described in plain terms.
Typing feel
Linear magnetic travel with a lighter 40g option and a firmer 50g alternative. The force variant changes physical key weight, while actuation behavior is configured by the compatible Hall Effect keyboard.
Fit & build
Compatibility & build notes
What to check before ordering, and how the build is put together.
Linear
5-pin PCB Mount
Factory Lubed
POM Stem
Compatibility
For Hall Effect / magnetic-switch PCBs only. Not compatible with a standard MX-contact PCB. Confirm support for the exact keyboard model and firmware before purchase. Specialist retailers use different mount terminology for this HE switch. LumeKeebs and Milktooth say 5-pin PCB mount, while KBD.news lists a 2-pin footprint. Treat exact board fit as a pre-purchase verification item. 5-pin mount — confirm PCB and plate support for your board.
Build notes
Ti HE requires a compatible Hall Effect / magnetic-switch PCB and is not a drop-in replacement for a standard MX-contact mechanical PCB. Exact board support must be checked by keyboard model and firmware because HE sensor implementations differ, and published mount/footprint terminology for this switch is not fully consistent across specialist sources. Choose 10 switches for testing or small replacements or 70 for many compact builds, then count the actual sockets and keep spares as needed.
Fit & trade-offs
Decide quickly whether this product fits your build
A strong fit if you want
✓
Hall Effect keyboard owners comparing a lighter 40g or firmer 50g physical keypress. / Gamers who want an established magnetic-switch option with broad specialist-retailer documentation. / Builders who want factory-lubed linear HE switches and are willing to confirm board compatibility first.
Consider alternatives if you prefer
→
A different switch type
If you need tactile feedback or a silent build, compare other families.
→
A specific force target
Pick a switch whose operating force matches your preference.
→
Another build use case
Match the product to how and where you actually type.
Sizing help
How many switches do you need?
Switch count depends on your keyboard's layout. The typical ranges below are a starting point — the exact number depends on the specific model and any extra keys.
60%
61 – 68 keys
65%
66 – 75 keys
75%
81 – 88 keys
TKL
87 – 92 keys
Full-size
104 – 110 keys
This product is available in packs of 10 / 70 switches — pick a pack that covers your layout with a small margin for testing or replacements.
Exact switch count depends on keyboard model / layout (and any novelties or extra keys). Always confirm against your board's official key count before ordering.
Product deep dive
Understand the product before you choose it
Focused sections explain the details buyers care about, supported by the product's specification data.
TYPING FEEL & SOUND
Choose 40g for lighter presses or 50g for more resistance
The Ti HE is sold in two physical force variants. The 40g option is the lighter choice, while the 50g option adds more resistance through the keypress. Because Hall Effect keyboards can set actuation electronically, the force choice mainly changes how heavy the switch feels under your fingers rather than fixing one actuation point.
Retailers consistently describe both versions as linear and factory lubricated. That should support a smooth, uninterrupted press, but final sound and feel still depend heavily on the keyboard case, plate, keycaps, damping, and firmware tuning. KeebPilot does not treat one force as universally better for gaming or typing.
- 40g is the lighter physical force option for rapid repeated keypresses.
- 50g gives a firmer press without changing the switch’s linear HE design.
- Actuation behavior is configured by the compatible Hall Effect keyboard, not by a fixed contact point.
Bottom line: Pick 40g for lower effort; choose 50g when you want a firmer physical keypress and noticeably more resistance.
CONSTRUCTION & SPECS
A short-travel HE design with a wide magnetic flux range
The Ti HE specifies 3.4 ± 0.2 mm total travel, 120 ± 20 Gs initial magnetic flux, and 750 ± 50 Gs bottom-out magnetic flux. Construction uses a PC top housing, a PA closed-bottom housing, a POM stem, and a 15 mm non-magnetic spring.
The short 3.4 mm travel keeps actuation and reset quick, which suits fast-paced gaming on Hall Effect boards that support adjustable actuation and rapid trigger.
- Total travel is 3.4 ± 0.2 mm for quick actuation and reset.
- Magnetic flux is consistently reported around 120 Gs initially and 750 Gs at bottom-out.
- PC top housing, PA closed-bottom housing and a POM stem keep the switch light.
What it means: Short 3.4 mm travel, a wide magnetic flux range, a PC top housing and a PA closed-bottom housing with a POM stem.
BUILD FIT & QUANTITY
Confirm your Hall Effect PCB before choosing a pack size
The Ti HE requires a keyboard PCB designed for magnetic Hall Effect switches. It is not a drop-in replacement for a standard MX-contact mechanical PCB. Mount terminology can differ between HE boards, so the exact board and sensor implementation still matters.
The listed pack options are 10 switches and 70 switches. This product is currently unavailable. Ten switches are practical for testing or replacing a small number of switches, while 70 switches suit many 60% and 65% builds. For larger layouts, count the sockets on your keyboard and leave a few spares instead of assuming one pack fits every board.
- Hall Effect compatibility is mandatory; standard MX-contact PCBs are not supported.
- Match the Ti HE to your specific Hall Effect keyboard and firmware support; magnetic switch compatibility depends on the board’s sensor and PCB implementation.
- Pack size should follow the keyboard’s actual socket count, not only the advertised layout percentage.
Build note: Check the exact HE keyboard compatibility first, then choose pack quantity based on your real socket count plus spares.
COMPARE ALTERNATIVES
Compare HE switches by compatibility, force and travel before brand
The Ti HE sits in a crowded magnetic-switch market where several models can look interchangeable at a glance. A useful comparison starts with PCB compatibility, force, total travel, housing construction, lubrication, and the magnetic range supported by the target board. Those factors matter more than simply choosing the most familiar brand name.
The Ti HE’s strongest shopping case is its established retail presence and simple 40g or 50g choice. It is already listed by specialist keyboard stores in multiple regions. That makes it easy to benchmark against other Hall Effect switches, but it does not guarantee universal fit or identical behavior across different HE keyboards.
- 40g and 50g create a clear force choice without changing the overall linear HE product identity.
- Multiple specialist retailers carry or have carried the switch, providing strong market validation.
- Universal HE compatibility should never be assumed because sensor and PCB implementations can differ.
Decision note: Use the Ti HE as a well-documented HE option, but verify board fit and preferred force before treating it as interchangeable.
Decision support
Open full comparison →
Compare OWLAB Ti HE Magnetic Switches with realistic alternatives
The goal is to make the key trade-offs visible: weight, travel, stock preparation, sound direction, and the type of user each product serves best.
Specifications
Type
Linear
Linear
Linear
Linear
Operating Force
40 gf
36
45 gf
40
Bottom-out Force
—
—
50 gf
50
Total Travel
3.4 ± 0.2 mm
3.5
3.5 mm
3.3
Sound Profile
—
Build-dependent; back-covered design targets a more focused sound
Crisp, loud, clacky; bright-leaning tendency
Muted, low-noise and office-friendly
Factory Lubed
Yes
Yes
Yes
Yes
Mount
5-pin
5-pin
5-pin
5-pin
Stem Material
POM
—
POM
POM
Best For
—
—
—
—
Structured product data
Detailed specifications
General
- Brand
- OWLAB
- Switch type
- Linear
- Mount
- 5-pin
- Factory lubed
- Yes
Performance
- Operating force
- 40 gf
- Total travel
- 3.4 ± 0.2 mm
- Typing feel
- Linear magnetic travel with a lighter 40g option and a firmer 50g alternative. Physical force changes key weight, while actuation behavior is configured by the compatible Hall Effect keyboard. Factory lubrication should reduce friction, but final feel remains board-dependent.
Construction
- Stem material
- POM
- Top housing
- PC
- Bottom housing
- PA (closed-bottom)
Compatibility
- PCB mount
- 5-pin
In the box
What's in the box
Exactly what ships with this product. The switch count and color update with the options you select.
Selected pack
10
switches
- Included switches10 switches
- Selected color—
Product-specific FAQ
Frequently Asked Questions
Straight answers to the questions that most often decide a purchase.
OWLAB Ti HE switches are linear Hall Effect magnetic keyboard switches offered in 40g and 50g force variants. They use magnetic sensing rather than traditional electrical switch contacts and therefore require a compatible Hall Effect keyboard PCB. They are factory lubricated according to multiple specialist retailers.
The two versions share the same basic Ti HE construction, while the physical force rating changes. The 40g version is lighter under the fingers and the 50g version adds more resistance. Hall Effect actuation settings are still controlled by the compatible keyboard and firmware rather than by a fixed mechanical contact point.
No. These switches require a Hall Effect or magnetic-switch PCB and are not intended for standard MX-contact mechanical keyboard PCBs. Even among HE keyboards, compatibility can depend on the PCB, sensor calibration and firmware, so confirm support for your exact board before ordering or joining a restock.
Wooting HE models are commonly listed among compatible boards. Match the Ti HE to your specific Hall Effect keyboard and firmware support, because magnetic switch compatibility depends on the board’s sensor and PCB implementation.
Yes. LumeKeebs, Milktooth, OZO, DeskHero and KBD.news all describe the Ti HE as factory lubricated or pre-lubed. Extra hand lubrication is therefore optional rather than a requirement. Any additional lubing can change sound and feel, so it should be treated as a personal tuning choice.
Total travel is 3.4 ± 0.2 mm.
The listed pack options are 10 switches and 70 switches for both 40g and 50g variants. This product is currently unavailable. A 10-pack is useful for testing or small replacements, while 70 switches can cover many compact builds. Always count your keyboard sockets and consider keeping a few spare switches.
This product is currently unavailable. You can compare its specifications and compatibility here and use Notify Me for availability updates.
Track availability without losing your product research.
Join the waitlist now, or compare OWLAB Ti HE Magnetic Switches with similar products.